How to Install Nox

1. Check VT(Virtualization Technology)

1-1. First, Download File

Securable.exe

This is program to check VT in you PC.

1-2. Run and set VT

(1) Hardware Virtualization = Yes

if 'Hardware Virtualization = Yes', Congratulations! VT is supported in your PC.

Now, You should set VT setting!

Caution!

Sometimes, You may have to set VT. This just tell you that Your PC support VT or not.

Please check this in BIOS. That should be set 'Enabled' or 'Enable'

(2) Hardware Virtualization = No

In this case, VT is not supported in you PC.

Nox will not work correctly or be slow. Secuable may show like below.

(3) Hardware Virtualization = Locked on/off

If Securable show this message, Your PC have VT. But your PC manufacturer blocked VT by some reason.

(Addition: In 'Locked off', You have to modify by force but I am not recommend it. Please use CPU support VT. If you want to modify, Search about it yourself. I can't reply this.)

1-3. How to turn VT on

What can we do!? It is simple. 

(1) Windows 7

When your PC reboot, Press hotkey(F2, F7, F8, Del, etc) quickly to enter into BIOS.

Hotkey is different by mainboard manufacturer. Check your mainboard and Search its website. You may be able to find that key.

(2) Windows 8

https://www.asus.com/support/faq/1008329

(3) Windows 10

http://www.laptopmag.com/articles/access-bios-windows-10

Did you success in going to BIOS? Look down.

In BIOS, Find 'VT/Virtualization/Virtual Technology/SecureVirtual Machine Mode' and Modify 'Disabled → Enabled' The name of VT may be different. 

Now, Shutdown your PC completely and Run Securable. You can see 'Yes or Locked On' :)

2. Install Nox

2-1. Download Nox

http://www.yeshen.com/en/download/fullPackage

2-2. Turn off Vaccine(Real-Time Protection)

Check Vaccine installed in your PC and Turn it off.

Some vaccines are using VT. This can make some troubles. Because of VT(They can't share VT)

2-3. Run and Install

(1) The process of installation is very simple. Just follow install program.

(Not Install AOWE. TowerMacro will install this auto)

(2) Run Nox and check 'Red exclamation mark'

if you have that mark, VT setting is not completed.

In this case, Follow this.

1. Shutdown your PC completely and wait for 1 min(To wait for being removed data in mainboard and CPU).

2. Turn PC on and Disable VT.

3. Shutdown again(like 1)

4. Turn PC on and Enable VT.

5. Shutdown again(like 1)

6. Turn your PC on and Check mark in Nox

(3) Close Nox completely

(To use macro's function opening Nox automatically.)

2-4. Payment

After done, You have to pay a usage fee($30=30days) with Paypal.

Tell me your mail address in Line(ID : constell).

(Download Line : http://line.me/en/download)

Thank you.